This domain name is up for sale. Please send your offer to hostmaster@elatomo.com.

Bosch Injectors upgrade?

N/A tech, Cold Air Intakes, Spark Plugs/wires, Cat backs, Exhaust...etc

Moderators: daewoomofo, Moderators Group

Bosch Injectors upgrade?

Postby Turtle_Wax » Mon Sep 17, 2007 2:00 pm

Thanks to MMamdouh for posting the Bosch injector part No (0280150715) that replaces the Lanos stock injectors.
I have found a local supplier who has a set of those injectors. The flow rate is correct at around 155cc/min @ 3bar but looking at the specifications I notice that the resistance of the Bosch injectors is around 15.9 Ohms but the resistance of the Woo injectors is between 11.6 to 12.4 Ohms. Before I buy these I just wanted to know if the higher Ohm resistance of the Bosch injectors will make any difference or cause any probs? Cheers.
Turtle_Wax
Junior
 
Posts: 149
Joined: Sun Apr 02, 2006 6:58 pm

Postby Turtle_Wax » Wed Sep 19, 2007 10:48 am

My Bosch injectors arrived today. I got them from this site (second item down that now says sold). I paid 51 uk pounds which is a very good price and they are fully serviced and ultrasonic cleaned including new seals & pintle caps.
http://www.injectorcleaning.co.uk/sale.htm

Fitted them this morning and I am amazed at the difference compared to the stock GM injectors. As soon as I drove off I could tell straight away there was a lot more responsive power as soon as I touched the throttle. I am very pleased with the results and a big thanks to MMamdouh for posting the Bosch injector part #. Those injectors are also fitted to the BMW 1.8 E30 engine and I think a few other variants as well.
Turtle_Wax
Junior
 
Posts: 149
Joined: Sun Apr 02, 2006 6:58 pm

Postby MMamdouh » Sun Sep 23, 2007 12:05 pm

8)

MMamdouh
Driving is the utmost fun you can have with your pants on!
Check out my ride: http://www.cardomain.com/ride/567267
Image
User avatar
MMamdouh
Moderator
 
Posts: 7285
Joined: Wed Feb 18, 2004 8:33 am
Location: Cairo, Egypt

Re: Bosch Injectors upgrade?

Postby napo72 » Sat Apr 27, 2013 3:01 am

thanks for the help, was very useful
napo72
 
Posts: 3
Joined: Thu Apr 25, 2013 8:55 pm


Return to Engine/Intake/Exhaust

Who is online

Users browsing this forum: Bing [Bot] and 1 guest