This domain name is up for sale. Please send your offer to hostmaster@elatomo.com.

Forenza/reno/optra/nubira headers

Group Buys... Be 100% sure before trying to start a group buy. Please don't Abuse of this forum.

Moderators: daewoomofo, Moderators Group

Forenza/reno/optra/nubira headers

Postby kinkyllama » Wed Apr 18, 2007 10:27 pm

I think few of you know but I recently started a business called "Kinky Motorsports". For now I'm focusing on the forenza/reno/optra but will be getting into other woo's once I get lots of stuff out for the forenza. I dont want to get ahead of myself and I already work far more hours than I should so it's one thing at a time. It'll be a little while before I have a website up but for the meantime I made a myspace(www.myspace.com/kinkymotorsports).

I've been working on n/a headers for some time and finally one is done. We're still trying to setup a dyno to finish the testing and whatnot but pictures will be posted by the weeks end. The price is looking to be $330 but it's not solid yet...either way it'll stay under $400usd. They come with a new heat shield with an "S" stamped on it for the suzuki models and come with a special coating to try to keep heat down in the engine bay and up in the exhaust (helps flow). The first sets are going on ebay since about 5 people came to me within 5 mins of posting on suzuki-forums.com. The headers are going to come with a 5 year warranty against the welds. I'll give some more info as I post pics and dyno results.

We're also in the process of making test pipes (to replace the main CAT) and a very very special cat-back exhaust for the forenza/reno/optra using a totally different kind of design. However I won't be saying anymore about the cat-back untill it's done.

Also if intrest is there we can make something for the leganza and other cars after were finished with the test pipes, and cat-back.

Cheers!
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
User avatar
kinkyllama
Expert
 
Posts: 3772
Joined: Wed Oct 20, 2004 4:47 am
Location: USA, Arizona

Postby mocpac » Thu Apr 19, 2007 2:41 am

As soon as you got pics let me (us) know
ImageImage
User avatar
mocpac
Moderator
 
Posts: 3385
Joined: Sat Jun 14, 2003 9:24 pm
Location: Puerto Rico

Postby Efrain A. » Thu Apr 19, 2007 3:38 am

cool kinky

i can help you with the website if you want ;)
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
User avatar
Efrain A.
Admin
 
Posts: 2260
Joined: Wed Oct 30, 2002 6:41 pm
Location: Dominican Republic

Postby kinkyllama » Thu Apr 19, 2007 7:25 pm

mocpac wrote:As soon as you got pics let me (us) know

No problem!


Efrain A. wrote:cool kinky

i can help you with the website if you want ;)

PM sent
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
User avatar
kinkyllama
Expert
 
Posts: 3772
Joined: Wed Oct 20, 2004 4:47 am
Location: USA, Arizona

Postby mezomaster » Thu Apr 19, 2007 8:36 pm

COOOL man, i was looking for a header for the 1.6L nubira and replacement for the cat. , already got Jasma back muffler
User avatar
mezomaster
Expert
 
Posts: 354
Joined: Thu Jul 13, 2006 6:51 pm
Location: Egypt-Giza

Postby kinkyllama » Fri Apr 20, 2007 4:03 am

mezomaster wrote:COOOL man, i was looking for a header for the 1.6L nubira and replacement for the cat. , already got Jasma back muffler

I shoulda been more accurate...this will only fit the nubira 2.0l.

Though I'd like to make something up for the 1.6...is the lanos, nubira, and aveo 1.6 all the same as far as headers would go? If thats the case I'll probably be intrested in doing something.
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
User avatar
kinkyllama
Expert
 
Posts: 3772
Joined: Wed Oct 20, 2004 4:47 am
Location: USA, Arizona

Postby kinkyllama » Thu Apr 26, 2007 4:22 am

Dyno should be done at the very end of this week then I'll be taking orders unless we change something. Then were starting on the test pipes and cat-backs.

Can someone tell me the difference between the leggy and forenza headers? Isn't it just the leggy needs more clearance from the oil pan?
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
User avatar
kinkyllama
Expert
 
Posts: 3772
Joined: Wed Oct 20, 2004 4:47 am
Location: USA, Arizona

Postby Aneab » Thu Apr 26, 2007 8:17 am

I'm quite interested here... I'd love to come by and see the one you're tossing on your Forenza
a woo that is a work in progress
User avatar
Aneab
Expert
 
Posts: 892
Joined: Mon Oct 24, 2005 6:05 am
Location: Phoenix

Postby kinkyllama » Thu Apr 26, 2007 4:34 pm

Aneab wrote:I'm quite interested here... I'd love to come by and see the one you're tossing on your Forenza

Okay...but I dont have my forenza right now. Long story short, tranny died, getting an F28, about 6 sellers stopped messaging me back, finally got one and am trying to work out details, hopfully I'll have it within a 10 days, then need to find a shop (sent out emails to a few that should be able to do it). Though I might have one for pictures and for when I get my forenza running. If so I'll let you know.

Ciao
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
User avatar
kinkyllama
Expert
 
Posts: 3772
Joined: Wed Oct 20, 2004 4:47 am
Location: USA, Arizona

Postby gse_turbo » Thu May 03, 2007 9:11 pm

do you plan on T3 haeder?

garrett
Image
User avatar
gse_turbo
DTM Daewoo Mod
 
Posts: 2392
Joined: Fri Jun 23, 2006 4:20 am
Location: Englewood, Colorado United States

Postby kinkyllama » Thu May 03, 2007 10:37 pm

gse_turbo wrote:do you plan on T3 haeder?

garrett

I dont know...I'd like to make up some really really nice turbo manifolds. I was gonna make one for myself so I figured I'd have a few extra done.
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
User avatar
kinkyllama
Expert
 
Posts: 3772
Joined: Wed Oct 20, 2004 4:47 am
Location: USA, Arizona

header flange

Postby gse_turbo » Thu May 03, 2007 11:31 pm

if it makes things move faster, i can offer up the totally choice header flange that i programmed for the one i started for me. it's in DXF and DWG so anyone shop can cut it or buy one cut from me in 1/2" stainless.

garrett
Image
User avatar
gse_turbo
DTM Daewoo Mod
 
Posts: 2392
Joined: Fri Jun 23, 2006 4:20 am
Location: Englewood, Colorado United States

Postby gse_turbo » Thu May 03, 2007 11:45 pm

i should have made that more clear, i have the flange in stainless for turbo applications as well as mild steel for "all motor' applications.

garrett
Image
User avatar
gse_turbo
DTM Daewoo Mod
 
Posts: 2392
Joined: Fri Jun 23, 2006 4:20 am
Location: Englewood, Colorado United States

Postby mocpac » Sat May 05, 2007 10:31 pm

any update?
ImageImage
User avatar
mocpac
Moderator
 
Posts: 3385
Joined: Sat Jun 14, 2003 9:24 pm
Location: Puerto Rico


Return to Group Buys

Who is online

Users browsing this forum: No registered users and 1 guest